Cemento Shower Base Concrete Finish (Made In Italy) | Domus Living

• Installation above any floor: flush floor or semi-inset
• Made In Italy
• Troweled concrete texture texture
• 30mm Thickness
• 4 colours: Bianco (matte white), Cappuccino (matte light brown), Grigio Ash (matte ash grey) and Nero (matte black)
• Anti-slip (certified AS 4586 ) / easy to clean surface 
• Stain and scratch resistance surface
• Inbuilt fall: the whole shower floor area drain the water to the waste.
• Grout free shower floor area: no maintenance, no leaks
• Domustone is not an engineered stone, there is no quartz/crystalline silica in the material formula.
• The model Cemento comes with a Domustone® waste cover

Downloads:

• 900×900
• 900×1200
• 900×1400
• 900×1600
• 900×1800
• 1000×1000
• 1000×1200

Other sizes are available on request please click here

• CLICK HERE TO DOWNLOAD THE TECHNICAL INSTALLATION INSTRUCTIONS MANUAL
• DOWNLOAD ARCHITECTURAL CATALOGUE WITH INSTALLATION GUIDELINES

DAILY CARE
using soap and water or common detergents to remove most of the dirt and stains that may be deposited on the surface. It is particularly recommended to rinse the surface well and to use gel or abrasive detergents with abrasive sponges like “Scotch Brite©” : doing that way, the original matt finish, distinguishing feature of Domustone Pure®, will keep untouched.

HOW TO PREVENT FROM DAMAGES
The surface is generally strongly resistant against stains and spots; nonetheless aggressive chemical products, such as acetone, trichloroethylene, strong acids or bases are not recommended.

HOW TO REMOVE PERSISTENT STAINS, SCRATCHES AND BURNING RINGS
Domustone Pure® is an homogeneous material in all its thickness and depth, thus it can restore its surface original beauty from aggressive agents, such as scratches, burning rings from cigarettes and persistent stains, simply by following these instructions: as for small damages, use an abrasive Scotch Brite© (3M trademark) sponge and a common abrasive detergent to restore the surface. Rub superficially the damaged part down.

TO USE
Powder or cream detergents like JIF©, VIM© or similar, containing micro-granules with abrasive action on the surface.

NOT TO USE
Solvent agents like acetone or trichloroethylene, as well as other aggressive chemical substances like strong acids (muriatic acid…) or bases (caustic soda…). Detergents for industrial use or others of unknown aggressive action: in this case a test on a spot not in view should be done before application. Very aggressive substance generally used to clear sink pipes. Solvents used in the painting industry.